中文版

Graphite anode plate
【Structure and characteristics】
Graphite anode plate is less carbon ash material preparation, after grinding, Kneading, shaping, baking, impregnation, and then more than 2500 ℃ high temperature graphite resistance furnace, and another by mechanical finishing. Finished with a very good chemistry, physics and electrical conductivity, thermal conductivity performance. This production of large graphite anode plate may be in the electronics industry and other industries on the application.
Specifications Dimensions: Length: 1200 ~ 3000mm; width: 300 ~ 540mm; thickness: 40 ~ 120mm. Can also customize the size according to user requirements.
【Physical and chemical indicators】
Project indicators
Resistivity ≯ 8.0μΩ ＆#8226; m
Ash ≯ 0.3%
Bulk Density ≮ 1.65 g/cm3
Compressive Strength ≮ 30 MPa
Size ≯ 1 mm
【Caution】
1, before installation check to match the same production equipment.
2, the installation may not be in any part of the force plate tap to prevent the plate fracture.
3, the use of a certain period of time and found the plate surface after the possession of other miscellaneous items must be cleaned after use.
4, before the use of water-resistant cover transportation, transit light light take place, to prevent the impact of collision damage. Storage to avoid rain, snow, water wet.
Have any technical advice please call: 13951310925